From: owner-dr-digest@lists.xmission.com (dr-digest) To: dr-digest@lists.xmission.com Subject: dr-digest V1 #147 Reply-To: dr-digest Sender: owner-dr-digest@lists.xmission.com Errors-To: owner-dr-digest@lists.xmission.com Precedence: bulk dr-digest Sunday, May 21 2000 Volume 01 : Number 147 (dr) A silver DRZ?? Re: (dr) A silver DRZ?? Re: (dr) DR650 questions (dr) Sprockets (dr) Dog Bones RE: (dr) Sprockets ---------------------------------------------------------------------- Date: Fri, 19 May 2000 20:04:34 EDT From: Comobu@aol.com Subject: (dr) A silver DRZ?? Did I hear the new DRZ also comes in silver? I was once starryeyed in love with a Yamaha DT250 2 stroke in silver... 78 or 79? Guy - - to unsubscribe to dr, send an email to "majordomo@xmission.com" with "unsubscribe dr" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. ------------------------------ Date: Fri, 19 May 2000 20:27:52 -0000 From: "Mark Sampson" Subject: Re: (dr) A silver DRZ?? > Did I hear the new DRZ also comes in silver? I was once starryeyed in love > with a Yamaha DT250 2 stroke in silver... 78 or 79? > > Guy Don't think so Guy!!!!! I'm in the Suzuki shop all the time and know the dealer very well---all we talk about are the new DR's. And we haven't heard or seen anything about a silver one. The blue one's are the fastest!!! :) Mark Sampson didi@acworld.net 2000 Suzuki DRZ400S 1999 Yamaha TTR250 (to old to kick) 1997 BMW F650 (Little Red) 1989 Honda Transalp--the bike that almost does it all!!!!!!! All GPS equipped of course!!! - - to unsubscribe to dr, send an email to "majordomo@xmission.com" with "unsubscribe dr" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. ------------------------------ Date: Sat, 20 May 2000 06:44:02 -0600 From: "Kurt Simpson" Subject: Re: (dr) DR650 questions > I've read the posts about the ISD2 pipe (by Kerker??) for the '96 and up > 650's. Dennis Kirk catalogue lists a pipe for the '96-'98 DR650SE at a price > of $204. My question is, will the same pipe fit the '00 DR? Is there another > source with a better price? the ISD2 pipe is by SuperTrapp and yes it will fit the '00. Can't help you with price. SuperTrapp's are famous for occasional fit problems and for that reason I'd buy it from one of our list suppliers like Jesse, Al, or Fred. Kurt - - to unsubscribe to dr, send an email to "majordomo@xmission.com" with "unsubscribe dr" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. ------------------------------ Date: Sat, 20 May 2000 14:05:46 EDT From: Cklppnbrg@aol.com Subject: (dr) Sprockets Question: I will be in need of replacing my rear sprocket soon and am wondering what everyone else uses, as in, material, brand. Seems to be a variety of sprockets out there and want to know what material/manufacturer has the best wear for the money. The rear sprocket on my DR350 now is a 48T which I think means it is after-market, and I have found it is not perfectly round, or the bore that fits the rear wheel is off center. This can be seen whenever doing chain maintenance as the chain will be tighter with the wheel in one position and 180 degrees of rotation later it is loose. So quality is also of importance in judging the best value. Any suggestions? Thanks, Craig K DR350 Colorado Springs, CO - - to unsubscribe to dr, send an email to "majordomo@xmission.com" with "unsubscribe dr" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. ------------------------------ Date: Sat, 20 May 2000 19:22:22 +0100 From: "Wez" Subject: (dr) Dog Bones A while a go I posted a message, asking about the dog bones, I have now found out what thay are made of but befor I start to make a set I would like to know a few things first. 1, Is there any heat treatment needed. 2, If I wont to jack-up the rear end much shorter shall I make them. I think that on the originals thay are increased by about an inch or so, any information would be most greatfull. As I would not like to experiment with the lenght, as I would just like to bolt it on. Wez - - to unsubscribe to dr, send an email to "majordomo@xmission.com" with "unsubscribe dr" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. ------------------------------ Date: Sun, 21 May 2000 16:18:01 -0700 From: "Doug B" Subject: RE: (dr) Sprockets Steel sprockets are more durable than aluminum. -----Original Message----- From: owner-dr@lists.xmission.com [mailto:owner-dr@lists.xmission.com] On Behalf Of Cklppnbrg@aol.com Sent: Saturday, May 20, 2000 11:06 AM To: dr@lists.xmission.com Subject: (dr) Sprockets Question: I will be in need of replacing my rear sprocket soon and am wondering what everyone else uses, as in, material, brand. Seems to be a variety of sprockets out there and want to know what material/manufacturer has the best wear for the money. The rear sprocket on my DR350 now is a 48T which I think means it is after-market, and I have found it is not perfectly round, or the bore that fits the rear wheel is off center. This can be seen whenever doing chain maintenance as the chain will be tighter with the wheel in one position and 180 degrees of rotation later it is loose. So quality is also of importance in judging the best value. Any suggestions? Thanks, Craig K DR350 Colorado Springs, CO - - to unsubscribe to dr, send an email to "majordomo@xmission.com" with "unsubscribe dr" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - - to unsubscribe to dr, send an email to "majordomo@xmission.com" with "unsubscribe dr" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. ------------------------------ End of dr-digest V1 #147 ************************ - To unsubscribe to $LIST, send an email to "majordomo@xmission.com" with "unsubscribe $LIST" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.